...
Inspecting the links in context of the current diagram
Switch to the links tab and examine the list of links. Each link shows the source (SysML element) marked with an S and the target (requirement) marked with a T. On both, source and target, you can apply various commands via the local menu.
Commands of the Source Element (SysML element)
Remove: This command removes the link.
Open in Project Tree: This command switches to the project tree and expands the SysML model in the model tree of the SysML element.
Find in Project: This command searches for the element or diagram in the original model and expands the Cameo model tree at the right node.
Open in Smartfacts: This command navigates to Smartfacts and opens the published diagram or model element.
Commands of the Target Element (Requirement)
Open in original tool: This command navigates to Codebeamer with the right project loaded, with the right tracker loaded and the right requirement selected.
Open in local viewer: This command opens a window and loads the delegated UI of the Codebeamer requirement in Cameo. All attributes are listed in the delegated UI.
Expand requirements tree: This command switches to the requirements grid tab, loads the right tracker into the grid and expands the corresponding node in the hierarchy.
Inspecting the delegated UI of a linked Codebeamer Item in the links tab
Hover on the requirement
Open the local menu and select Open in Local Viewer. This will open a window and load the delegated UI of the requirement.
Removing a link from an item in the grid
Hover on the vertical grey bar of the requirement in the grid. Open the local menu of the SysML diagram or element for which you want to remove the link.
Select Remove.
Removing a link from the list of links in the context view
Hover on the SysML element (= source), for which you want to remove the link.
Open the local menu for that element and select Remove.
Navigating from Cameo to Codebeamer
You can navigate to the requirements grid (grid tab) or from the list of links (links tab) to Codebeamer. In both cases do the following:
Hover on the Codebeamer item, you want to navigate to.
Open the local menu and select Open in original tool. This will navigate you to Codebeamer, into the right project, into the right tracker with the right requirement selected.
Inspecting the delegated UI of a linked Cameo item
On the Codebeamer side, having opened the requirement in Item View you can inspect the list of links of the requirement in the Links tab.
If you switch to Document View, you see the list of links of the selected requirement under the Smartfacts plug-in tab.
Use ###Open in local viewer### to open the delegated UI of the SysML diagram or element.
Adding a link on the Codebeamer side
###