Managing Traceability in Cameo Systems Modeler

Starting Point & Preparations

1. Make sure the the Smartfacts plug-in is loaded and visible
   Sometimes Cameo does not show plug-ins, even if they are loaded and docked into the UI. In this case, open Window > Reset Windows Configuration in Cameo (Ctrl + Shift + W)

2. Select the project tab

3. Load the Codebeamer tracker into the plug-in via the local menu and expand the tracer node by node.

Adding a link

1. Open a diagram and select a Cameo item you want to link. You may also select a Cameo element in the model tree or you may select the frame of the diagram if you want to link the whole diagram

2. Select a tracker item in the Codebeamer grid.

3. Select Add link in the local menu of the Codebeamer item. This will open the link definition window.

4. Check if source and target of the link as well as link type are set correctly.

5. Click generate link

6. Result: The Codebeamer item has gotten a vertical grey bar, which indicates that the item has OSLC links. If you hover on the grey bar, you will see which elements have been linked to this item.

Inspecting the links in context of the current diagram

Inspecting the delegated UI of a linked Codebeamer Item

Removing a link from an item in the grid

Removing a link from the list of links in the context view

Navigating from Cameo to Codebeamer

Inspecting the delegated UI of a linked Cameo item

Adding a link on the Codebeamer side